Assembly Inner Frame; Removing The Assembly Inner Frame - Dell Latitude 5430 Service Manual

Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the 3-cell battery
2. Install the base cover.
3. Install the microSIM card.
4. Install the microSD card.
5. Follow the procedure in

Assembly inner frame

Removing the assembly inner frame

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the microSIM
4. Remove the base cover.
5. Remove the 3-cell battery
6. Remove the M.2 2280 solid-state drive
7. Remove the WLAN card.
8. Remove the WWAN card.
About this task
The following image indicates the location of the assembly inner frame and provides a visual representation of the removal
procedure.
or 4-cell battery.
after working inside your
before working inside your
card.
card.
or 4-cell battery.
or M.2 2230 solid-state
computer.
computer.
drive.
Removing and installing components 35