Atlas Copco XRVS 1000 CD8 T4F HOP Instruction Manual page 53

Maintenance schedule (hrs)
(continuation of page 52)
Analyse coolant (4) (8)
Check/Replace safety cartridge
Check/Clean diesel particulate filter (2)
(to be continued on page 54)
Note:
1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. After a day's work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Oil specifications.
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing points:
• 2913 0028 00 : refractometer
• 2913 0029 00 : pH meter.
9. See section Safety valve.
10.See section BEFORE STARTING.
11.Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
12.Samples to be obtained/analysed every 500 hours, starting at 250 hours. (250, 750, 1250,...)
Daily 50 hrs Every
after initial 250 hrs
start-up
- 53 -
Every Every Every
500 hrs 750 hrs 1000 hrs
Keep the bolts of the housing, the lifting eye,
the towbar and the axle securely tightened.
Refer to section Technical specifications for
the torque values.
Every Yearly
2000 hrs
x
x