Starting / Stopping; Battery Switch - Atlas Copco XRVS 1000 CD8 T4F HOP Instruction Manual

Portable compressors
Table of Contents

Advertisement

Starting / Stopping

Safety precautions
Do not disconnect power supply to control
box in any way when the control box is
switched on. This will cause memory loss.
Do not switch off the circuit breaker when
the control box is switched on. This will
cause memory loss.
Make sure the fuel tank is filled up when "INTERNAL
FUEL" is selected.

Battery switch

The compressor is equipped with a battery switch.
When the compressor is not in use this switch must always
be in the "OFF" position.
It is not allowed to use this switch as an emergency switch
or for stopping the compressor. It will cause damage in the
control unit when using this switch for stopping.
Always first shut off the control unit and wait until the
display is dark before switching the battery switch to
position "OFF".
Please be aware that the (optional)
preheater unit is still "live" with the battery
switch in "OFF" position.
Do not turn off battery switch when
aftertreatment purge lamp is illuminated.
Severe aftertreatment damage may occur !
Turn the battery switch (BS) off.
- 30 -

Advertisement

Table of Contents
loading

Table of Contents