Atlas Copco XRVS 1000 CD8 T4F HOP Instruction Manual page 38

The display now shows
MAIN VIEW
ENGINE WARMING UP
0s 15s
7s
41% 1286h 1200RPM
Active Buttons
Stop Button
(to cancel Start command)
Load Button
(to cancel Load command)
Measurement View Button
Settings View Button
Alarms View Button
After warming up the machine is ready to be loaded and is
waiting for a load command; the display shows
MAIN VIEW
READY TO LOAD
2.9 bar
41%
Stop Button
(to cancel Start command)
Load Button
(to cancel Load command)
Measurement View Button
Settings View Button
Alarms View Button
4.6
1286h 1200RPM 4.6bar
Active Buttons
- 38 -
Press the load button, the display will show
MAIN VIEW
BUILDING UP VESSEL PRESSURE
3.9
41% 1286h 1200RPM
When the load button is pressed and the measured vessel
pressure is lower then 4.5 bar, the controller will run a
specific program to reach the requested 4.5 bar, in order to
be able to load the machine. (Only applicable for 2-stage
machines).
Active Buttons
Stop Button
(to cancel Start command)
Load Button
(to cancel Load command)
Measurement View Button
Settings View Button
Alarms View Button
3.9bar