Atlas Copco XRVS 1000 CD8 T4F HOP Instruction Manual page 36

The display now shows
MAIN VIEW
PREPARING FOR START
0.0
41% 1286h --RPM
After pressing the START button the machine will
activate its horn and flasher light for 5 seconds, to notify
that it will start.
Active Buttons
Stop Button
(to cancel Start command)
Load Button
(to activate Automatic Load)
Measurement View Button
Settings View Button
Alarms View Button
The display now shows
MAIN VIEW
READING ENGINE DATA
0.0bar
41%
The engine electronics (ECU) will be powered up.
As soon as communication between compressor controller
and engine controller is established, the machine will
preheat according to the parameters of the engine
controller.
0.0
1286h --RPM 0.0bar
- 36 -
MAIN VIEW
ENGINE PREHEATING
0.0
41% 1286h --RPM 0.0bar
Active Buttons
Stop Button
(to cancel Start command)
Load Button
(to activate Automatic Load)
Measurement View Button
Settings View Button
Alarms View Button