Wedge Diagnostic Display Codes - Ingersoll-Rand XHP1070WCAT Operating & Maintenance Manual

Operating & Maintenance Manual

Wedge Diagnostic Display Codes

If the
If the
Dedicated Lights
Engine Speed <min rpm
Engine Speed >max rpm
Engine Crank Time Exceeded
High Engine Oil Temperature
High Intake Manifold Temp
Water in Fuel
Engine not responding to throttle
command
Too many start attempts during
Autostart
Engine shuts itself down, reason
unknown
Low AE Oil Pressure
Disch. Temp (RT2) Sensor Fault
Sep. Tank Pressure (PT1) Sensor
Fault
Sep. Tank Press >20 psi during start
attempt (engine will not crank)
Machine Over Pressure
Safety Valve Open
Sep. Tank Temp >247°F
Machine ID not valid
Sep. Tank Temp. (RT1) Sensor Fault
Reg. Sys. Pressure (PT2) Sensor
Fault
ESTOP Button Pushed
Minimum Pressure not met
70
?
fault indicator lamp is illuminated, refer to the
fault indicator lamp is illuminated, refer to the
?
ALERT/SHUTDOWN CONDITIONS
Code
5
6
8
10
33
54
55
56
? ?
?
Alert
Light (Blinks) Code
1
2
3
CPRSR Malf.
CPRSR Malf.
CPRSR Malf.
CPRSR Malf.
11
29
31
32
CPRSR Malf.
34
35
36
50
51
53
CPRSR Malf.
CPRSR Malf. 55
CPRSR Malf.
Book: 22742944 (3-17-06) Rev. A
Trouble Shooting
Alert/Shutdown List
Engine Diagnostic List
Shutdown
Delay
LIght (Steady)
(sec).
CPRSR Malf. 30
CPRSR Malf. 30
CPRSR Malf. 0
CPRSR Malf. 0
CPRSR Malf. 0
CPRSR Malf. 20
CPRSR Malf. 10
CPRSR Malf. 0
CPRSR Malf. 1
CPRSR Malf. 2
CPRSR Malf. 3
CPRSR Malf. 0
CPRSR Malf. 10
CPRSR Malf. 3