Page 1
XHP825 CM XHP900CM Doosan purchased Bobcat Company from Ingersoll-Rand Company in 2007. Any reference to Ingersoll-Rand Company or use of trademarks, service marks, logos, or other proprietary identifying marks belonging to Ingersoll-Rand Company in this manual is historical or nominative...
Pressure Regulation Adjusting Instructions Adjustment Instructions 8. With service valve closed, adjust pressure regulator (PR) to rated pressure (*) plus 10 psi (70kPa) as follows: The operating pressure of this unit was set at the factory to the maximum rating (at full speed) 9.
Page 37
(-23°C to 52° C) Alternate: ISO Viscosity Grade 46 with rust and oxidation inhibitors, designed for air compressor service. Preferred Ingersoll-Rand Fluids – Use Preferred: of these fluids with original I-R filters can 350 psi IR XHP605 -23°C to 52°C extend warranty.
Page 47
ITEM PART NUMBER DESCRIPTION 36898005 Bracket, Air Cylinder 35375856 Bolt (2) 95935011 Washer (2) 35584689 Air Cylinder 35288885 Bushing 35288893 Pivot Bolt 95934998 Washer 95923314 35264951 Control Lever 35607910 Lever 35300532 Rod End 95926028 Nut Jam 95934626 Bolt 95923330 95934907 Washer 35605799 Adjusting Rod...
Page 68
DECALS ITEM PART NUMBER DESCRIPTION 36532018 WARNING: High Pressure Air 36534956 FACTORY FILLED w/lubricant type 36512739 Oil Fill Plug 36534840 Oil Level...
Need help?
Do you have a question about the XHP650CM and is the answer not in the manual?
Questions and answers