Thermo King T-1000R Series Maintenance Manual page 66

Figure 118: Sleep Mode Menu
The screen shown in Figure 119 will appear..
Figure 119: Start of Sleep Mode Menu
The operator can now choose a Sleep Mode
Wake-up Time or simply enter Sleep Mode
immediately. If NO is pressed the unit will
immediately enter Sleep Mode.
Figure 120: Select No to Enter Sleep Mode
The display will show SLEEP and the unit will
start and stop as required to keep the engine warm
and/or the battery charged. Sleep mode does not
consider setpoint or maintain cargo temperatures.
To exit Sleep Mode press the EXIT key or turn the
unit off and back on. The unit will resume normal
operation and control to setpoint.
Figure 121: Sleep Mode Display
To enter a Wake-up Time, verify the unit clock is
set properly. Then press the YES key at the Sleep
Mode menu.
Operating Instructions for Premium HMI Control Panel
Figure 122: Yes Key
The display will prompt the operator for the DAY
the unit is to restart in normal operation. In Figure
123 Monday has been chosen. Press the YES key
to confirm the DAY.
Figure 123: Day Unit is to Restart
The display will now prompt the operator for the
Hour the unit is to restart in normal operation. In
Figure 124 4:00 am has been chosen. Press the
YES key to confirm the HOUR. Note that 24
hour "military time" is used.
Figure 124: Confirm Hour
The display will now prompt the operator for the
MINUTE the unit is to restart in normal operation.
In Figure 125 4:30 am has been chosen. Press the
YES key to confirm the MINUTE.
Figure 125: Confirm Minute
The display will now prompt for a Pretrip Test on
Wake-up. Press the YES key to perform a Pretrip
Test on Wake-up. If the No key is pressed the unit
will resume normal operation on Wake-up.
65