Sleep Operation - Haier AP88NACBEA Operation Manual

Operation instruction
Before going to bed, you can press the SLEEP button, the air conditioner will operate
in comfort sleep mode to make you have a sound sleep.
should calibrate the clock first, otherwise, the SLEEP function will be out of order.
Use of SLEEP function
After turning on the unit, setting the working mode, then press SLEEP button to
make the air conditioner have the previous Sleep time (powered on for the first time
or after performing Sleep is 1h). The Sleep symbol will appear. Press time */*
button, you can choose between 1~8h. Each press, it may increase/decrease 1h and
will display in the humidity area with ì xhî , and display ì Timer Offî in Timer Off
area and the time to turn off; press Sleep button again to cancel Sleep function. The
Sleep symbol disappears.
Operation modes
1.In COOLING, DEHUMIDIFYING operation
1 hour later in SLEEP operation, the temperature
will increase 1* from the set temperature, another
1 hour later increase another 1*, then the unit will
operate continuous for 6 hours, then it turns off
automatically. The temperature is higher than set
temperature to prevent you from getting a cold.
2.In HEATING operation
1 hour later in SLEEP operation, the temperature
will decrease 2* from the set temperature, another
1 hour later increase another 2*, then the unit will
operate continuous at this temperature for 3 hours,
then it increases 1*, after operating at this
temperature for another 3 hours, the unit will turn
off automatically. The temperature is lower than set
temperature to prevent you from feeling
uncomfortable during sleep.
3.In AUTO operation
The air conditioner will perform the relative SLEEP operation
according to automatically chosen operation mode.
4.In FAN operation
Cannot use SLEEP function
Note:
After setting Sleep function, it is not permitted to adjust clock.
l
The Sleep time is less than 8h, after reaching the set time, the unit will automatically stop.
l
Set Sleep function after setting ì Timer Offî function, the air conditioner will perform Sleep
l
function.
After setting Sleep function, the Timer function cannot be set.
l
Set Sleep function after setting ì Timer Onî function, the Sleep function can only be set
l
in the set time of Timer On.
Before using this function, you
SLEEP operation starts
1 hour
1 hour
Set temperature
in COOLING* DEHUMIDIFYING operation
Set temperature
1 hour
1 hour
SLEEP operation starts
8

Sleep operation

SLEEP operation stops
about 6 hours
increase 1*
increase 1*
turn off
turn off
decrease 2*
decrease 2*
about 3 hours
3 hours increase 1*
SLEEP operation stops
in HEATING operation
MODE FAN SWING
TEMP
CLOCK SET
SET
TIMER SLEEP
HEAT FILTER RESET
RESET
ON/OFF