When Troubles Occur - Haier AP88NACBEA Operation Manual

When Troubles Occur

Find the following troubles occur, please stop the unit and cut off power, then
contact the after-sales service worker.
If finding any abnormal phenomena (e.g. smell of burnt), please cut off power and ask help for after-sales
service personnel.
If still use the air conditioner under this condition, the unit may be damaged and maybe cause electric shock
or fire, etc. accidents.
The fuse and creepage breaker are often blown out;
or the operation switch works abnormally.
In Cooling or Dehumidifying operation, there is
water leakage;
The screen on the wire controller shows trouble
code (E0, Ö E9), which indicates the air conditioner has trouble.
The trouble of indoor ambient
temperature sensor
The trouble of indoor coil
temperature sensor
The trouble of outdoor ambient
temperature sensor
The trouble of outdoor coil/
compressor air out temperature
sensor
The trouble of electric current
overload / power item order
High / Low pressure protect
The communication trouble
between panel and indoor panel
The communication trouble
between indoor panel and
outdoor panel
Note: The trouble code will be displayed in the temperature display area.
Warning
Symptom
E1
E2
E3
E4
E5
E6
E8
E9
16
After taking the following measure,
please contact the commissioned
service center.
Cut off power
Cut off power and inform your
commissioned service center.
Tell the displayed contents of
the wire controller to your
commissioned service center.