Operation Instruction - Haier AP88NACBEA Operation Manual

Operation instruction

MODE
TEMP
CLOCK
TIMER
HEAT
FILTER RESET
ON/OFF
About FAN operation:
FAN operation refers the air conditioner does not perform COOLING and
HEATING operation, but FAN operation. In this mode, the air conditioner
cannot perform AUOT FAN operation, and does show the temperature
value on the wire controller.
1
FAN SWING
SET
2
SLEEP
RESET
3
4
Turn on the unit
Press the ON/OFF button to turn on the
unit
The LCD display of the wire controller
will show the previous working state
(except for Timer, Sleep, Swing mode), the
operation indicator light on the wire controller
will light up.
Choose of working mode
Press MODE button, each press the
working mode will change as the
following sequence:
AUTO COOLING
choose FAN operation
Adjusting FAN SPEED
Press the FAN SPEED button to change fan
speed:
LOW FAN MED FAN
Choose the desired fan speed
Turn off the unit
Press the ON/OFF button to turn off the
unit.
The wire controller only shows the clock and
room temperature.
6
Fan operation
FAN
DEHU HEATING
HIGH FAN