Sleep Operation - Haier AS18ND1HRA-WHITE Service Manual

Operation

Sleep Operation

Press button to enter additional options, cycle
the display to , will flash. And then press
enter for sleep function.
Operation Mode
1. In COOL,DRY mode
1 hour after SLEEP mode starts,temp.will become
higher than temp.setting.After another 1 hour,temp.rises
by 1 / 2 F futher. The unit will run for an additional 6
C
O
O
hours then stops Temp. is higher than temp.setting so
that room temperature won't be too low for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
In HEAT mode
2.
1 hour after SLEEP mode starts,temp will become 2
4 F lower than temp.setting.After another 1 hour,temp
O
decrease by 2 C / 4 F futher.After more another 3 hours,
O O
temp. rises by 1 C / 2 F futher.The unit will run for an
O O
additional 3 hours then stops.Temp.is lower than temp.
setting so that room temperature won't be too high for
your sleep.
Temp.setting
1 hr Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
1
SLEEP operation stops
Approx.6hrs
Rises 1 O C/ 2 F
O
O C/ 2 F
O
Unit stop
Unit stop
C/ 4 F
O
O
C/ 4 F
O
O
3 hrs
Rises 1 C/ 2 F
O O
SLEEP
operation stops
In AUTO mode
3.
If the unit is running cooling, the sleep mode will follow
the function as in cool mode, while follow as in heat mode.
4. In FAN mode
It has no SLEEP function.
5.Fan Speed in Sleep Mode
When the unit is set to sleep mode, the fan speed
will be set to low speed and it cannot be changed.
Note
When TIMER function is set, the sleep function can't be
set up .After the sleep function is set up, if user set up
TIMER function, the sleep function will be cancelled; the
machine will be in the state of timing-on.
C/2 F
O
O
Power/Quiet Operation
(1) Power Operation
When you need rapid heating or cooling, you can use this function.
Press button to enter additional options, cycle the
display to ,
power function. To cancel this function, please select a
different option.
(2) Quiet Operation
You can use this function when silence is needed for rest or
reading.Press QUIET button, the remote controller will show
, and then achieve to the quiet function. To cancel this
C /
O
function, press the QUIET button.
Note
Running the unit in QUIET mode for a long period may
cause the room temperature to not reach the set
temperature. If this occurs, cancel QUITE mode and set
the fan speed to a higher setting.
28
will flash，and then press
Domestic air conditioner
Installation
,enter to