Operation Instruction - Haier AP88NACBEA Operation Manual

Operation instruction

MODE
TEMP
CLOCK
TIMER
ROOM
HEAT FILTER RESET
ON/OFF
3.Set time
Press the time adjusting button
*
Each press, the set time increases 10 minutes. If depress the button, the time will
increase rapidly.
*
Each press, the set time decreases 10 minutes. If depress the button, the time will
decrease rapidly.
This LCD will show the time set, the time can be adjusted within 24h.
(AM stands for morning, PM stands for afternoon).
4.Confirm the time
After adjusting time, press SET button to confirm time.
At this time, the"
The time displayed is: at x oíclock x minutes the unit will be turned on.
5.Set the TIMER OFF time
Press the TIME button, the adjustment method is the same as the one of setting
TIMER ON time.
6.Confirm the time of TIMER OFF
After adjusting time, press SET button to confirm time.
At this time, the"
The time displayed is: at x oíclock x minutes the unit will be turned off.
Cancel TIMER
Press the TIMER button several times until the TIMER mode display disappears.
According to the sequence of TIMER ON & TIMER OFF setting, you can realize
turning on unit first, then turning off unit.
1.Turn on the unit
FAN SWING
2.Set of TIMER mode
SET
SLEEP
RESET
"will not flash ,"
ON
"will not flash.
OFF
Timer On-Off function
After turning on the unit, set the desired
working mode.
The LCD of the wire controller will show
working mode. (except for Timer, Sleep, Swing)
Press the TIMER button to change the TIMER
mode, each press the TIMER mode will change
as the following sequence:
ON OFF
AM
PM
TIMER ON TIMER OFF
Then choose the TIMER ON-OFF mode.
At this time the"
ON
"begins to flash.
OFF
10
ON OFF Blank
AM
PM
TIMER ON-OFF
"will flash.