Appendix A
Cabling Specifications
You can align the molded RJ-45 ends of the cables in different ways by following either Step a or Step b.
Step 2
a.
Figure A-8
Routing Cables with Molded RJ-45 Ends of Cables Next to Each Other
78-13311-01
Place the molded RJ-45 ends of the cables next to each other. This placement creates space between
the last molded RJ-45 end of the cable and the edge of the bracket adjacent to it. Route the cables
through this space. (See
Figure
Attaching the 8-Port Interface Cable to a Bracket (Optional)
A-8.)
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
A-9