Cisco AS5400 Installation Manual page 22

Removing and Installing Populated Carrier Cards
Figure 2-3
Captive
screw
Grasp the DFC handles and gently pull toward you to guide the carrier card out of the slot. Place one
Step 4
hand under the carrier card as you pull it out of the chassis. (See
Note
Figure 2-4
Figure 2-5
After you remove the carrier card from the chassis, set it aside on an ESD-preventive mat.
Step 5
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
2-4
Loosen the Captive Screws on the Cisco AS5400
DFC
Carrier
card
Use the DFC handles to remove the carrier card. Ensure that the DFCs are secured to the
carrier card.
Removing the Carrier Card from the Cisco AS5350
Removing the Carrier Card from the Cisco AS5400
Chapter 2 Dial Feature Card and Carrier Card Guidelines
DFC
Captive
screw
Figure 2-4
Chassis
and Figure 2-5.)
78-13311-01