Cisco AS5400 Installation Manual page 69

Cabling Specifications
This appendix provides cabling and pinout information for dial feature cards (DFCs) on the
Cisco AS5350 and Cisco AS5400 universal gateway:
• T1 and E1 Cable and Port Pinouts, page A-1
Attaching the 8-Port Interface Cable to a Bracket (Optional), page A-8
•
• CT3 Cable and Port Pinouts, page A-13
Bantam Jack Port Pinouts, page A-13
•
This appendix specifies pinouts only for the pins used. Pins not listed in the tables in this appendix
Note
are not connected.
T1 and E1 Cable and Port Pinouts
2-Port and 4-Port T1 or E1 DFC
Table A-1
RJ-45 Pin Description
1
2
3
4
5
6
7
8
78-13311-01
T1 or E1 Port Pinouts
RX Tip
RX Ring
RX Shield
TX Tip
TX Ring
TX Shield
-
-
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
A P P E N D I X
A
A-1