Cisco AS5400 Installation Manual page 44

Online Installation and Removal (OIR) of the T3 DFC
Loosen the two captive screws that secure the DFC to the chassis until each screw is free of the chassis.
Step 8
(See Figure 4-4
Figure 4-4
Figure 4-5
Grasp the DFC handle with one hand and pull the card toward you until the card slides free of the chassis.
Step 9
Grasp the ventilated metal cover with your other hand to support and guide the DFC out of the slot. (See
Figure 4-6
Caution Avoid touching any pins or circuit board components during removal and installation of the DFC.
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
4-4
and Figure 4-5.)
Loosen the Captive Screws on the Cisco AS5350
Captive
DFC
Captive
screw
screw
Loosen the Captive Screws on the Cisco AS5400
Captive
Captive
screw
screw
and Figure 4-7.)
Carrier
card
Chapter 4 T3 Dial Feature Card
Chassis
78-13311-01