Technical Data - Hilti SF 2H-A Operating Instructions Manual

Status
1 LED blinks.
Battery charge status cannot be displayed while the control switch is
pressed.
3.4 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
3.5 Items supplied
Hammer drill / driver, operating instructions.
Other system products approved for use with this product can be found
at your local Hilti Store or online at: www.hilti.group.
4

Technical data

4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01 1.2 kg
Speed
Torque (soft joint)
Torque range (15 settings)
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
Charging temperature
*2125998*
Printed: 19.06.2019 | Doc-Nr: PUB / 5251744 / 000 / 02
Meaning
• Charge status: < 10 %
1st gear
2nd gear
2125998
10.8 V
0 /min ... 400 /min
0 /min ... 1,500 /min
≤ 12 Nm
0.5 Nm ... 3.5 Nm
0.8 mm ... 10 mm
0.8 mm ... 14 mm
0.8 mm ... 10 mm
0.8 mm ... 6 mm
10.8 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 60 ℃
English 9