Using The Battery; Removing The Battery; Inserting The Battery - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

6.16

Using the battery


Switch off the battery and the drive system before
removing or inserting the battery.

6.16.1 Removing the battery

(1)
(2)
Figure 181: Removing the integrated battery
1 Open battery lock with battery key (1).
 The battery is released and falls into the
retainer guard (2).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (3).
 The battery is released and falls into the
hand (4).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
MY22Z0a - 12_1.0_25.07.2022

6.16.1.1 Inserting the battery


The key is inserted in the lock.

The lock is unlocked.
(3)
(2)
(4)
Figure 182: Inserting the integrated battery
1 Place the battery into the lower mount with the
contacts facing the front (1).
2 Flip the battery upwards so that the battery is
held by the retainer guard (2).
3 Keep the lock open with the key.
4 Push the battery upwards (3).
 The battery can be heard locking into place.
5 Check battery to ensure it is firmly in place on
all sides.
6 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the see (4).
7 Remove the battery key from the battery lock.
8 Check the battery to ensure it is firmly in place
before each ride.
Operation
(4)
(1)
(3)
163