Adjusting The Rockshox Compression Adjuster - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

6.5.17.2 Adjusting the RockShox compression adjuster

Only applies to pedelecs with this equipment
1
2
Figure 166: Position and shape of the compression adjuster (blue) depends on the model
1 Set the compression adjuster to the middle
position.
2 Ride the pedelec over a small obstacle.
 Turn compression adjuster clockwise.
 The damping and compression hardness is
increased. The deflection stroke speed is
reduced.
 Turn compression adjuster anti-clockwise.
 The damping and compression hardness is
reduced. The deflection stroke speed is
increased.
3 The ideal setting for the rebound damper has
been achieved when the rebound movement of
the rear wheel feels comparable to that of the
front wheel.
MY22Z0a - 12_1.0_25.07.2022
Operation
149