After Each Ride; Cleaning The Riding Light And Reflectors; Cleaning The Suspension Fork; Caring For The Suspension Fork - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

Pedelecs with led remote on-board computer
Hide thumbs Also See for ZEMO SU-E FS 12:
Table of Contents

Advertisement

7.2

After each ride

Complying with these cleaning instructions is the
only way to reduce wear on components, increase
the operating hours and guarantee safety.
The following items should be ready for use to
clean the pedelec after each ride:
Tool
Cloth
Bucket
Brush
Fork oil
Table 50: Required tools and cleaning agents after each
ride
7.2.1
Cleaning the riding light and
reflectors
1 Clean headlight, rear light and reflectors with a
damp cloth.
7.2.2

Cleaning the suspension fork

1 Remove dirt and deposits from the stanchions
and deflector seals with a damp cloth. Check
the stanchions for dents, scratches, staining or
leaking oil.
2 Lubricate the dust seals and stanchions with a
few drops of silicone spray.
3 Service the suspension fork after cleaning.
7.2.3

Caring for the suspension fork

 Treat dust seals with fork oil.
MY22Z0a - 12_1.0_25.07.2022
Cleaning agent
Dish-washing
Water
liquid
Acid-free
Silicone or
lubricating
Teflon oil
grease
Cleaning, servicing and inspection
7.2.4

Cleaning the pedals

 Clean pedals with a brush and soapy water.
7.2.5

Cleaning the brake

 Clean dirt on the rim and brake components
with a slightly dampened cloth.
7.2.6

Cleaning the suspension seat post

 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
7.2.7

Cleaning the rear frame damper

 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
183

Advertisement

Table of Contents
loading

Table of Contents