Nameplate - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

Pedelecs with led remote on-board computer
Hide thumbs Also See for ZEMO SU-E FS 12:
Table of Contents

Advertisement

3.2

Nameplate

The nameplate is situated on the frame. The exact
position of the nameplate is described in Figure 3.
Figure 2: Example ZEG nameplate
No. Designation
1
CE marking
2
Manufacturer's contact details
3
Type number
4
Maximum continuous power rating
5
Maximum permitted total weight
6
Year of manufacture
7
Pedelec type
8
Safety markings
9
Disposal instructions
10
Area of use
11
Model year
12
Weight of the ready-to-ride pedelec
13
Shut-off speed
Table 11: Explanation of information on the nameplate
MY22Z0a - 12_1.0_25.07.2022
ZEG Zweirad-Einkaufs-
Genossenschaft eG
Longericher Str. 2
50739 Köln, Germany
Typ:
3
22-17-1017
EPAC
nach
EN 15194
4
0,25 kW / 25 km/h
5
zGG 150 kg
EPAC 25 kg
6
BJ 2021 / MJ 2022
7
8
Description
The manufacturer uses the CE marking to declare that the pedelec
complies with applicable requirements.
You can contact the manufacturer at the address indicated.
All pedelec models have an eight-digit type number, which is used to
specify the design model year, the type of pedelec and the version.
The maximum continuous power rating is the greatest possible power for
the electric motor output shaft over 30 minutes.
The maximum permitted total weight is the weight of the fully assembled
pedelec with the body weight plus the baggage.
The year of manufacture is the year in which the pedelec was
manufactured.
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Safety markings warn of hazards.
Follow the guidelines on waste disposal when disposing of the pedelec.
Ride pedelec in permitted locations only.
The model year refers to the first production year that the series-
manufactured pedelec was produced in the version concerned. The
production period is between June 2021 and June 2022. The model year is
sometimes different from the year of manufacture.
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Any extra
accessories need to be added to the weight.
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
The nameplate contains thirteen pieces of
information.
2
1
13
12
11
10
9
Description
More
information
Section
1.1
Section
3.2
Section
3.1
Section
2.7
Section
10.1
Section
3.1.3
Section
4.1
28

Advertisement

Table of Contents
loading

Table of Contents