1.10 CHILLER LINE INSTALLATION.
Connect the chiller line of the outdoor unit as shown in Fig. 16.
Connect the smaller pipe on the fitting (1) and the larger pipe on
the fitting (2).
Using a torque wrench, tighten the nuts (1 and 2) to the tightening
torque indicated on the outdoor unit manual.
22
As far as connecting the chiller line is concerned, all the instruc-
tions contained in the outdoor condensing unit instructions
booklet must be followed.
Make the connections directly on the indoor unit couplings (Fig.
16).
It is suggested to apply thermal insulation over the entire
length of the pipes and connection fittings to reduce
the formation of condensate during summer operation.
2
1
17