HP 48gII Advanced User's Reference Manual page 623

15.The Command Menu-Path Table
The hp49g+/hp48gII programmable commands in CAT order. An "H" in the first
column means this command has a HELP screen. A "-" in the first column
means "not shown in the 49g+ CATalog". Following each command is its menu
path or key sequence (if any) with alternatives separated by a semicolon.
"/" means "either". The most efficient key sequence is shown first if
several exist, assuming that NXT NXT is better than PREV, etc. "[]" =
optional. This list assumes that library 256 is attached, flag -95 is off,
and flag -117 is set.
SYNTAX EXAMPLES:
! (key ALPHA-RS-2; MTH NXT PROB)
This means that you can either press [ALPHA] [RIGHT-SHIFT] [2] or press
[MTH] [NXT] [PROB] [!] to get the ! function.
+ (key 95.1)
This means that [+] is on the keyboard in row 9, column 5. The
.1 means unshifted;
.2 means left-shifted;
.3 means right-shifted;
.4 means alpha-shifted;
.5 means alpha-left-shifted; and
.6 means alpha-right-shifted.
.01 added means hold down the shift key while pressing the key, e.g. key 22.21
is MODE with the left-shift key held down...also called LS&MODE.
AMORT (79 MENU)
This means that AMORT is not in any keyboard menu, but you can find it in
numbered menu 79 (type 79 MENU to go to that menu).
QUOT («POLYNOMIAL» NXT; ARITH POLY PREV)
This means that QUOT is in the POLYNOMIAL menu, a special menu which is not a
numbered menu, nor on the keyboard, but is seen by executing the
«programmable» command POLYNOMIAL. QUOT can also be found in the
ARITH POLY PREV menu.
The Command Menu-Path Table I - 1
I