Xserv; Xvol; Xxrng - HP 48gII Advanced User's Reference Manual

XSERV

Type: Command
Description: XModem Server Command: Puts the calculator in Xmodem server mode. When in server mode,
the following commands are available:
P: Put a file in the calculator
G: Get a file from the calculator
E: Execute a command line
M Get the calculator memory
L: List the files in the current directory
...µ
Access:
See also: BAUD, RECN, RECV, SEND XRECV, XGET, XPUT

XVOL

Type: Command
Description: X Volume Coordinates Command: Sets the width of the view volume in the reserved variable
VPAR.
x and x
left right
in the reserved variable VPAR.
...µ
Access:
Input/Output:
See also: EYEPT, XXRNG, YVOL, YYRNG, ZVOL

XXRNG

Type: Command
Description: X Range of an Input Plane (Domain) Command: Specifies the x range of an input plane
(domain) for GRIDMAP and PARSURFACE plots.
x and x
min
stored in the reserved variable VPAR.
...µ
Access:
Input/Output:
See also: EYEPT, NUMX, NUMY, XVOL, YVOL, YYRNG, ZVOL
XY
Type: Command
Description: Sum of X times Y command: Sums the products of each of the corresponding values in the
independent- and dependent-variable columns of the current statistical matrix (reserved variable
DAT). The independent column is the column designated as XCOL and the dependent column
is the column designated as YCOL.
...µ
Access:
Input/Output:
See also: N , X, XCOL, XY, X2, YCOL, Y2
XSERV
set the x-coordinates for the view volume used in 3D plots. These values are stored
XVOL
Level 2/Argument 1 Level 1/Argument 2
x
left
are real numbers that set the x-coordinates for the input plane. These values are
max
XXRNG
Level 2/Argument 1 Level 1/Argument 2
x
min
XY
Level 1/Argument 1
x
right
x
max
Full Command and Function Reference 3-205
Level 1/Item 1
Level 1/Item 1
Level 1/Item 1
Sum of X*Y