Floor; Font6; Font7; Font8 - HP 48gII Advanced User's Reference Manual

Description: Evaluate Flash Function Command: Evaluates unnamed Flash functions.
WARNING: Use extreme care when executing this function. Using FLASHEVAL with
random addresses will almost always cause a memory loss. Do not use this function
unless you know what you are doing.
#n is of the form ffffbbbh, where bbb is the bank ID, and ffff is the function number.
function
...µ
Access:
Input/Output:
See also: EVAL, LIBEVAL, SYSEVAL

FLOOR

Type: Function
Description: Floor Function: Returns the greatest integer that is less than or equal to the argument.
!´
Access:
Flags: Numerical Results (–3)
Input/Output:
See also: CEIL, IP, RND, TRNC

FONT6

Type: Function
Description: Font Function: Returns the system FONT6 object. You use this in conjunction with the
FONT command to set the system font to type 6.
...µ
Access:
Input/Output:
See also: FONT7, FONT8,

FONT7

Type: Function
Description: Font Function: Returns the system FONT7 object. You use this in conjunction with the
FONT command to set the system font to type 7.
...µ
Access:
Input/Output:
See also: FONT6, FONT8,

FONT8

Type: Function
3-66 Full Command and Function Reference
FLASHEVAL
Level 1/Argument 1
#n
function
LL
REAL FLOOR
Level 1/Argument 1
x
x_unit
'symb'
6
FONT
Level 1/Argument 1
FONT, FONT
7
FONT
Level 1/Argument 1
FONT, FONT
( ´ is the left-shift of the Pkey).
Level 1/Item 1
Level 1/Item 1
n
n_unit
'FLOOR(symb)'
Level 1/Item 1
Font object
Level 1/Item 1
Font object