Const; Constants; Cont; Convert - HP 48gII Advanced User's Reference Manual

See also:

CONST

CONST
Type: Function
Description: Constant Value Command: Returns the value of a constant.
CONST returns the value of the specified constant. It chooses the unit type depending on flag
–60: SI if clear, English if set, and uses the units depending on flag –61: units if clear, no units if
set.
...µ
Access:
Flags: Units Type (60), Units Usage (61)
Input/Output:
See also: CONLIB

CONSTANTS

CAS: Display menu or list of CAS symbolic constants.

CONT

Type: Command
Description: Continue Program Execution Command: Resumes execution of a halted program.
Since CONT is a command, it can be assigned to a key or to a custom menu.
!æ
Access:
Input/Output: None
See also: HALT, KILL, PROMPT

CONVERT

Type: Command
Description: Convert Units Command: Converts a source unit object to the dimensions of a target unit.
The source and target units must be compatible. The number part x
ignored.
!Ú
Access:
Input/Output:
See also: UBASE, UFACT,

CORR

Type: Command
Description: Correlation Command: Returns the correlation coefficient of the independent and dependent
data columns in the current statistics matrix (reserved variable DAT).
The columns are specified by the first two elements in the reserved variable PAR, set by XCOL
and YCOL, respectively. If PAR does not exist, CORR creates it and sets the elements to their
default values (1 and 2).
The correlation is computed with the following formula:
CONST
Level 1/Argument 1
'name'
UNITS TOOLS CONVERT
Level 2/Argument 1 Level 1/Argument 2
x _units
1 source
UNIT, UVAL
( æis the left-shift of the ‡key).
( Ú is the left-shift of the 6key).
x _units
2 target
Full Command and Function Reference 3-35
Level 1/Item 1
x
of the target unit object is
2
Level 1/Item 1
x _units
3 target