Page 3
Your new Aseptico AEU-500 Mini-Electric Portable Dental System is one of the finest motor/handpiece combina- tions available to the professional. With its speed range of 5,000 to 30,000 RPM and included straight and Doriot latch contra-angle handpieces, the AEU-500 is well suited for many uses including light-duty dental laboratory work and chairside work such as prophy.
Page 4
SETTING UP THE UNIT: 1. Remove the Console from the Carrying Case and check that the voltage is proper for the country of use. AEU-08D CONSOLE Use 110V for 110-120V 60Hz voltages, and 220V for 220-250V 50Hz voltages. POWER CORD For alternative voltages (220V- 250V), confirm that the type of plug cap is correct for the country of...
Page 5
5. Foot Switch - Controls the on/off activation of the Motor and Handpiece. The AEU-500 is shipped with the AE-7P On/Off Foot Switch. Plug the foot switch into the Foot Switch Receptacle on the back of the Console and select 'Foot' mode for proper operation.
Page 6
4. Turn the Speed Control Knob until the desired operating speed is reached. CONSOLE FRONT CAUTION Do not switch the Rotation from Forward to Reverse or from Reverse to Forward while the AEU-500 is operating. Stop the motor by releasing the foot switch or turn the power to off before switching rotation.
Page 7
STERILIZATION & MAINTENANCE: CONSOLE - The exterior of the console may be cleaned by wiping with a soft cloth moistened with mild detergent or disinfecting solution. HANDPIECES - Thorough cleaning and lubrication of handpieces after each use and before sterilization is very important to ensure proper operation and service life of the handpiece.
Page 8
In the event of alleged defect under warranty, the purchaser is to notify Aseptico's Customer Service Department promptly. Customer Service will provide instructions, usually directing that the product be returned for service. Shipment to Aseptico and the cost thereof is always the responsibility of the purchaser.
Need help?
Do you have a question about the AEU-500 and is the answer not in the manual?
Questions and answers