GE LOGIQ C Series Quick Manual page 36

LOGIQ C Series Quick Guide
Related Hazards (continued)
Do not use this equipment if a safety problem is known to exist. Have the unit repaired and performance verified by qualified service
CAUTION
personnel before returning to use.
Smoke & The system must be supplied from an adequately rated electrical circuit. The capacity of the supply circuit must be as specified in Chapter
3 of the Basic User Manual.
Fire Hazard
Biological For patient and personnel safety, be aware of biological hazards while performing invasive procedures. To avoid the risk of disease
transmission:
Hazard
• Use protective barriers (gloves and probe sheaths) whenever possible. Follow sterile procedures when appropriate.
• Thoroughly clean probes and reusable accessories after each patient examination and disinfect or sterilize as needed. Refer to
Probes and Biopsy for probe use and care instructions.
• Follow all infection control policies established by your office, department or institution as they apply to personnel and equipment.
Contact with natural rubber latex may cause a severe anaphylactic reaction in persons sensitive to the natural latex protein. Sensitive
CAUTION
users and patients must avoid contact with these items. Refer to package labeling to determine latex content and FDA's March 29, 1991
Medical Alert on latex products.
Archived data is managed at the individual sites. Performing data backup (to any device) is recommended.
CAUTION
Do not use high-frequency surgical equipment with LOGIQ C Series system.
CAUTION
Direction 5401576-100 Rev.1 31