GE LOGIQ C Series Quick Manual page 37

LOGIQ C Series Quick Guide
Device Labels
Label Icon Description
The following table describes the purpose and location of safety labels and other important information provided on the equipment
Label/Icon
Identification and Rating Plate
Type/Class Label
IP Code (IPX1 )
IPX1: FSU-2001
!
Direction 5401576-100 Rev.1
Manufacture's name and address
Date of manufacture
Model and serial numbers
Electrical ratings (Volts, Amps, phase, and frequency)
Used to indicate the degree of safety or protection.
Indicates the degree of protection provided by the enclosure per IEC60 529. IPX1 cannot be used in operating
room environment; IPX8 can be used in operating room environment.
Type BF Applied Part (man in the box) symbol is in accordance with IEC 878-02-03.
General Warning
"CAUTION" - Dangerous voltage" (the lightning flash with arrowhead) is used to indicate electric shock
hazards.
ON" indicates the power on position of the power switch.
CAUTION: This Power Switch DOES
NOT ISOLATE Mains Supply.
"Protective Earth" indicates the protective earth (grounding) terminal.
Table 6: Label Icons
Purpose/Meaning Location
See "Warning Label Locations" on page 48 for
more information.
Bottom of Foot Switch
Beside the probe connector
Various
Various
Refer to Chapter 3 in the Basic User Manual for
location information.
Inside of AC adapte and Console
32