GE LOGIQ C Series Quick Manual page 4

LOGIQ C Series Quick Guide
LOGIQ C2/C2PRO Control Panel Tour
1. Power On/Off Switch
2. Probe Key:switch the probes
3. Top Menu Controls
4. Use the keyboard to enter
Keyboard :
patientinformation and annotations.Press F1,
F2, F3, F4 and F5 keys to activate Online help/
User Manual, Arrow, Eject, Spooler and
activate Sub Menu. The User can define
functions for the F6-F12 keys. The following
functions are available for F6-F12 Keys:
WorkSheet, 3D, LOGIQ View, Set Home, Grab
Last, Word delete and Text Overlay. Press
[Utility] to enter the Utility function and
configure the system. Press [Report] to enter
the worksheet page.Press[End Exam]to end a
exam.
5. Preset,Comments Keys
6. Paitent Key:Use the key to display th paitent
screen
7. Mode Keys: B Mode,M Mode.Press these key
to activate the mode
8. Gain/Auto Key:Rotate the key to adjust the
Gain; Press the key to activate/deactivate auto
optimization.
9. Zoom Key:magnify a zoom region of interest
(ROI).
10. Ellipse Keys: activates the area/ellipse
measurement function.
11. Depth Key:controls the distance over the
images
12. Reverse,Print, Store Key:Reverse key can flips
the image 180 degrees left/right. Print Key can
archive, print, or send the image.Store Key can
save the images to harddisk( factory default)
Direction 5401576-100 Rev. 1
13. Left, Right Key:activate the Left or Right
displayed image.
14. Freeze. Press Freeze to freeze the image or
return to scanning.
15. Trackball
16. Imaging/Measurement Key: Cursor, Clear,
Body Mark Measure, M Cursor, Scan Area,
Set. Press these keys, as necessary.
17. Time Gain Compensation(TGC):Move slide
pots left/right to adjust TGC.
18. Gel Holder
19. Probe Holder
Figure 1. LOGIQ C2/C2PRO Control Panel
Control Panel Tour
1