LOGIQ C Series Quick Guide
Acceptable Devices
The devices shown in "Patient Environmental Devices" on page 44 are specified to be suitable for use within the PATIENT ENVIRONMENT.
DO NOT connect any probes or accessories without approval by GE within the PATIENT ENVIRONMENT.
CAUTION
See
"Peripheral Update for EC countries" on page 41
Unapproved Devices
Unapproved devices, such as unsupported printers, VCRs, etc. should not be used in the patient environment.
CAUTION
If devices are connected without the approval of GE, the warranty will be INVALID.
Any device connected to the LOGIQ C Series must conform to one or more of the requirements listed below:
1. IEC standard or equivalent standards appropriate to devices.
2. The devices shall be connected to PROTECTIVE EARTH (GROUND).
Accessories, Options, Supplies
Unsafe operation or malfunction may result. Use only the accessories, options and supplies approved or recommended in these
CAUTION
instructions for use.
Direction 5401576-100 Rev.1
for more information.
45
Safety
Need help?
Do you have a question about the LOGIQ C Series and is the answer not in the manual?
Questions and answers