Tilt Cover / Swivel Cover - Star Micronics AsuraCPRNT Technical Manual

2

5 . Tilt Cover / Swivel Cover

(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Move the tilt cover 1 down as indicated by the arrows
in the illustration on the left so that the two tabs (in the
red circles) pop out.
(3) Remove the tilt cover 1 .
(4) Tilt the LCD 2 in the direction indicated by the arrow.
(5) Place your fingers under the LCD section on either side,
and then push the swivel cover 3 forward to remove .
3
– 6 –