Table of Contents
Advertisement
TROUBLESHOOTING
The verge flail mower cuts unevenly or badly
The cutting sound changes
Vibrations
Hydraulics do not work
FLAILS
WARNING! NEVER mount different types of flails on the mower.
When the flails have been mounted, always check the tightness of the flail screws.
Ensure that all screws are fully tightened.
90 mm
Mounting of hammer flail onto verge flail mower.
Hammer flails can be replaced with Y-flails (not included, may be purchased additionally).
Article no. for Y-flail: R35-SK180.003
Spacers R35-VKM175.008
Table of Contents
MEASURE
Check that all flails are intact and firmly in position.
Adjust the support roller and check that is in the correct position.
Check the drive belts and tighten if necessary.
Check the roller.
Check the tension of the drive belts.
Check the flails.
Check the flails.
Check hoses and connections.
40 mm
15
Advertisement
Table of Contents
