General Instructions; Approvals; Fire Prevention; Electric Shock Prevention - ProLights ECLFRJPTU-DY User Manual

WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• This unit is not for home use, only professional applications.
• The connection to the main network of electric distribution must be carried out by a qualified electrical
installer.
• Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• Do not modify the unit in any way not described in this manual or install parts other than the original
Music & Lights parts. Do not apply filters, lenses or other materials on lenses or other optical compo-
nents. Use only accessories approved by Music & Lights.
• If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void.
• We decline any liability deriving from improper use of the product.

Approvals

• The products referred to in this manual conform to the European Community Directives LVD (Low Volt-
age Directive) 2014/35 / EC, EMC (Electromagnetic Compatibility Directive) 2014/30 / EU, RoHS (Restric-
tion of Hazardous Substances Directive) 2011/65 / CE and are therefore marked with

Fire prevention

• The minimum distance between the projector and the surrounding walls and flammable materials
must be greater than 50 cm and the ventilation openings must in no case be blocked.
• Replace a defective, blown or damaged fuse only with one of the same type. To replace the fuse, refer
to the "Maintenance" paragraph.
• Do not use the unit if the ambient temperature exceeds 45 ° C (122 ° F).
• The surface of the appliance can reach up to 50 ° C (158 ° F) during operation. Avoid contact with peo-
ple and materials.
• Make sure there is a free and unobstructed air flow around the appliance.

Electric shock prevention

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Disconnect power to the unit when not in use.
• Install the fixture in a well ventilated place.
• Refer to any service operation not described in this manual to Music & Lights technical support.
• Isolate the unit immediately from the power supply if any gaskets, covers, cables or other components
are damaged, defective, deformed or showing signs of overheating. Do not reapply power until repairs
are complete. Before using the unit, check that all components and power distribution cables are in
perfect condition.Check that the frequency and voltage of the network correspond to the frequency
and voltage for which the unit is set up, indicated on the electrical data plate.
ECLFRJPTU - DY
.
0,5 m
T 45°C
a
3