Maste/Slave; Static - ProLights MINIECLFRFC User Manual

12
and press the ENTER button to display it.
- Fixture Time - Through the Fixture Time function you can display the operating time of the projector.
- Software Version - Through Temperature function you can display the temperature of the device.
- Temperature - Through Temperature function you can display the temperature of the device.
- UID - This option shows the RDM identification number.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.12 MASTER SLAVE
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Master/Slave and press ENTER to confirm
your choice.
• Press the UP/DOWN button to select the mode of operation:
- Master, if the unit is connected in series with other units and it acts as the Master;
- Slave, if the unit is not connected to other units.
• Press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.13 STATIC

The unit allows you to create configurations that can be set through the following procedure:
• To enter to static static mode, Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select Stand Alone, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Static and press ENTER to confirm your
choice.
• Throught the UP/DOWN buttons select Presents or Manual Color Mixer and press the ENTER button to con-
firm the desired function.
• Set the colors (Red, Green, Blue, Lime, Cyan, Magenta, Yellow, Orange, Light Yellow, Light Blue, Light Pink, 2800 K, 3200
K, 4200 K, 5500 K, 6000 K, 8000 K) or value (000 - 255) throught the UP/DOWN buttons, then press the ENTER
button to confirm
• Press the MENU button repeatedly to exit the menu and to save the changes made.
NOTE: once the projector is connected to a power outlet, to directly access the Present Dimmer mode, simply
double click on the knob, rotating it. After that, choiche the desired value.
MINIECLFRFC