Table of Contents
Advertisement
∗: Measurement mode can return from any setting item by pressing the
OUT2 output check
Press the
or
output check.
Press the
button to set.
Diagnostic output check
(using the IO-Link communication only)
Press the
or
diagnostic output check.
∗: IO-Link mode can provide the communication function.
∗: Refer to page
63
for details of the diagnostic information.
Press the
button to set.
PD measurement value
(using the IO-Link communication only)
The upper and lower limit values of the rated
pressure value can be output compulsively as
PD measurement value (process data). Press
the
or
button to select the
lower or upper limit
value.
∗: IO-Link mode can provide the communication function.
∗: Refer to page
63
for details of the PD measurement value.
Press the
button to
return to [n] (Normal output),
then press the
button to
set.
Return to function selection
mode.
[F98] Output check completed
-56-
button to select OUT2
button to select the
SET button for 2 seconds or longer.
No.PS※※-OMV0006-D
Advertisement
Table of Contents
