Raider RD-GPS01 User Manual page 26

26 www.raider.bg
particles that will suck the engine will shorten its service life. Remove the air filter. Clean the filter
with solvent and allow to dry completely after cleaning. Do not clean the air filter with flammable
liquids, as a fire or explosion may occur under certain conditions. After cleaning, replace the air filter.
Candle maintenance.
The recommended type of spark plug is Champion RCJ7Y, NGK BPMR7A or NHSP LD L8RTF. To
ensure normal operation of the engine, the spark plug must have an adequate distance between
the electrodes and must be cleaned of deposits. Remove the "pipe" of the candle by pulling it by
the handle at the top. Never remove the pipe by pulling on the cord. The muffler can be very hot if
the engine is running. Be careful not to touch the muffler. Use the spark plug wrench to unscrew
the spark plug. Check the spark plug visually. Discard the spark plug if it is obviously worn or the
insulation is broken or cracked. "Also check the O-ring. If the spark plug is in excellent condition,
clean it with a copper wire brush and screw it back into the cylinder head. When screwing in a
new spark plug, tighten it an additional 1/2 turn after the spark plug reaches and presses the "O"
ring. Make sure the spark plug is properly tightened. Improper tightening can cause the engine to
overheat and damage it. Use only high quality candles of the specified type.
12. Transport and storage.
When carrying the pole saw, you must put the protective cover on the cutting chain and apply the
chain brake. Carrying a switched on and unprotected castor oil can result in personal injury.
The pole saw must be checked. Check the attachment of the moving parts for damaged parts.
In case damage is found, it is necessary to remove them before using the pruner. Improper
maintenance of the machine can cause many accidents.
The cutting chain must be clean and with sharp cutting edges. Regular sharpening of the chain
reduces the risk of getting stuck and makes work easier.