Raider RD-GPS01 User Manual page 19

19
1.3.7. The pole saw can only be used for cutting wood.
Any other use can damage the machine and be dangerous.
1.3.8. Never use the machine with damaged or used parts. Parts that do not have the same quality
can damage the machine or endanger your safety. Therefore, replace them only with original ones.
1.3.9. Carry the machine with the engine switched off. Before transporting in your car, you must let
it cool down and empty the tank. Always ensure that the machine is securely fastened and balanced
during transport.
1.3.10. Tighten all nuts and bolts well to ensure safety when working.
1.3.11. In an emergency, switch off the engine quickly.
1.3.12. Remember that the owner or user of the motor pole saw is responsible for accidents or
incidents with third parties.
1.3.13. Be careful, some parts of the machine can become very hot.
3/1/14 Warning! This machine creates an electromagnetic field during operation. In some
circumstances, this field may interfere with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend that people with medical implants consult their physician and
the manufacturer of the medical implant before operating this machine.
1.3.15. There is information that during prolonged work certain vibrations could cause Reynolds
syndrome in some people. Symptoms include a burning, tingling, and fading sensation in the
fingers, which usually occurs with a cold. Symptoms can also be influenced by hereditary factors,
cold, humidity, diet, diet, smoking and work habits. To date, no reliable link has been established
between vibration and these symptoms, however, the following measures will reduce the risk.
1.3.15.1. Always keep your body warm in cold weather. Wear warm and thick gloves. There is
evidence that cold weather is one of the main causes of Reynolds syndrome;
1.3.15.2. After work, do physical exercises to warm the body and speed up blood circulation;
1.3.15.3. Take periodic breaks during work;
1.3.15.4. Keep the machine in good technical condition. All screw connections must be tight.
Replace worn parts with new ones in a timely manner.
If you notice any of the symptoms during work, stop and consult your doctor.
Never leave the pole saw before the work tool has completely stopped rotating. The rotating tool
may touch an object, causing you to lose control of the pruner.
- Regularly clean the ventilation holes of your castration.
- Do not use the pole saw near flammable materials. Flying sparks can ignite such materials.
-. Never place your hands near rotating work tools. If a recoil occurs, the tool may injure you.
--- Be especially careful at the end of the cut. In the absence of resistance, as provided by the
processed material, the pole saw falls by inertia and can cause injuries.
- You may feel tingling in your fingers or hands during prolonged use. In this situation, you must stop
work and take the rest you need, as you cannot steer the pole saw well with numb hands.
- If signs of fatigue appear, stop work immediately.
- The pole saw can only be operated by one person. All other persons must be away from the range
of the pole saw. This is especially true for children and animals.
- When switching on the pole saw, the cutting chain must not rest on the material designed to
process and touch anything. It must be free until the required machine speed is reached.
- During operation, hold the pole saw firmly with both hands on both handles. Take a stable position.
- The pole saw should not be used by children and adolescents. The pole saw can only be used by
adults who know how to work with it. The pole pole saw should be submitted with these operating
instructions.
- The pole saw is only removed from the workpiece when the cutting chain is moving.
- On sloping terrain, face the slope during cutting.
- When cutting horizontally, you must position yourself at an angle as close as possible to 90 ° to the
material. Such an operation requires special attention.
- When the chain is trapped during cutting at the top of the chain, a bounce in the direction of the
operator may occur. Therefore, you should cut using the lower part of the chain, because then when
the chain is locked, the bounce will not occur in the direction of your body.
- Be especially careful when cutting split wood. Cut pieces of wood can be thrown in any direction
and cause injuries!
-The cutting of tree branches should be done by trained people. Uncontrolled fall of the cut branch