Advertisement
Available languages
Available languages
The high-performance and powerful engine meets the requirements of professional users.
Always work with a mixture of gasolineand two-stroke oil in a ratio of 25: 1.
Information about emitted noise and vibrations.
The values are measured according to Directive 2000/14 / EC.
Sound pressure level: LpA = 77.5 dB (A)
Measured sound power level: LwA = 108.2 dB (A)
Uncertainty coefficient K = 3 dB (A)
Work with mufflers!
Vibration level: ah = 6.303 m / s2
Uncertainty coefficient K = 1.5 m / s2.
2.1. Oil is one of the main factors influencing engine performance and life. Always use only high
quality oil. To obtain the correct mixture ratio, the amount of oil must be measured accurately.
2.2. Use high quality oil for two-stroke gasoline engines.
3. Preparation before starting the motor pole saw.
3.1. Pour the fuel mixture into the tank. Please use unleaded gasolinewith an octane rating of
95. When using gasolinewith a lower octane rating, the engine will knock and its temperature will
rise. This can lead to serious damage. For prolonged use, the use of higher octane gasolineis
recommended.
3.2. Gasoline must be mixed with two-stroke oil in a clean tank in a ratio of 25: 1. (25 parts gasoline
and 1 part two-stroke oil). Stir the fuel mixture before pouring it into the castration tank.
3.3. Check the air filter. A dirty air filter will limit the flow of air into the carburetor. To prevent
carburetor malfunctions, be sure to clean the air filter periodically. Check the filter to see if it is too
dirty and clean it if necessary. Do not start the engine without an air filter, as this can lead to rapid
engine wear if dirt or dust is sucked into it through the carburetor.
4. Start the engine.
Put the ignition key in the start position. If the engine is cold or the ambient temperature is low, close
the carburetor throttle valve completely, ie pull the "sucker" by moving its lever. After starting the
engine, wait a while until the engine warms up and gradually return the vacuum cleaner. A sure sign
of the need to return the vacuum cleaner (open the throttle valve) is the appearance of thick smoke
from the muffler.
21
Advertisement
