Table of Contents
Advertisement
VTR action
Problem
Video head gap
After clogged head is detected,
recording continues but is
clogged or problem in
recording circuit.
substandard.
Servo lock lost.
Recording continues but is
substandard.
Interface error
VTR stops.
between system CPU
and servo CPU.
Condensation on the
Recording continues but stops if
head drum.
the tape sticks to the head drum.
Playback, fast forward, and
rewind do not operate.
The tape cannot be
An error code appears in the time
wound properly.
code display section of the
display panel. Look up the error
code in the Maintenance Manual.
Near the end of tape.
Operation continues.
End of tape.
Record, playback, and fast
forward do not operate.
Operation continues.
Low battery.
Dead battery.
Operation stops.
Interface error
Recording continues, but some
between system CPU
operations such as recording
and servo CPU.
review and cueing do not operate.
If another problem also occurs, its
indication is given priority.
Corrective action
Clean the heads. If recording is still
substandard, turn off the power and consult
your Sony representative.
Turn off the power and consult your Sony
representative. Note that this indication may
be given momentarily when the tape starts
moving, but this does not indicate a problem.
Turn off the power and consult your Sony
representative.
Stop the tape and wait until the HUMID
indicator disappears.
Remove the cassette by the method
described in the Maintenance Manual.
Close the cassette lid without loading a
cassette, turn off the power, and consult
your Sony representative.
Be prepared to change the cassette.
Change the cassette or rewind the tape.
Change the battery.
Change the battery.
Turn off the power and consult your Sony
representative.
Chapter 6 Maintenance
6
6-13
Advertisement
Table of Contents
