Recording; Basic Procedure - Sony HDW-700 Operation Manual

3-2 Recording

3-2-1 Basic Procedure

This section describes the basic procedure for shooting and recording.
Before a shooting session, ensure that the camcorder is functioning
properly.
For more information, see Section 6-1 "Testing the Camcorder Before Shooting
"(page 6-1).
Turning on the camcorder and loading a cassette
Follow the procedure below.
Basic procedure for shooting : from power supply to cassette loading
1
Attach a fully charged battery pack.
2
Set the POWER switch to ON. Check that the HUMID indicator
does not appear and that the BATT indicator shows at least five
segments.
• If HUMID indicator appears, wait until it disappears.
• If the BATT indicator does not show at least five segments,
replace the battery pack with a fully charged one.
4 3 1
• •
Chapter 3 Recording and Playback
2
(Continued)
3-5
3