Table of Contents
Advertisement
Selecting the display items
Follow the procedure below to select the items to be displayed on the
viewfinder screen.
1
Set the VF DISP switch to MENU.
The OPERATION menu appears on the viewfinder screen.
2
Turn the MIC/MENU knob until the VF DISPLAY page appears,
4
and push the MIC/MENU knob.
EX: Extender indicator
ZOOM: Zoom position indicator
SHUTT: Shutter speed, mode, and read mode indicator
IRIS: Iris opening indicator
D5600K: D5600K mode indicator
TAPE: Remaining tape indicator
AUDIO: Audio level indicator
TC: Time code indicator
CAM ID: Camera ID indicator
VOLT: Power voltage indicator
FILTER: Filter indicator
WHITE: White balance memory indicator
GAIN: Gain indicator
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4
Turn the MIC/MENU knob to change the desired setting, and push
the MIC/MENU knob.
The question mark (?) changes back to the arrow (→) to confirm the
setting.
4-44
Chapter 4 Adjustments and Settings for Recording
Advertisement
Table of Contents
