Recharging The Battery - infaco A3MV2-48V Original User Manual

Tying machine
Table of Contents

Advertisement

RECHARGING THE BATTERY

The battery has sufficient autonomy to complete between 12 500 ties.
If you are thinking of doing more than 8000 ties a day, we advise you to either recharge
the battery for at least an hour during your lunch break to achieve extra autonomy of
approximately 10 000 ties.
N.B. a few minutes before your battery is completely discharged, the A3MV2 may lose speed
or no longer cut the wire.
Charger
Battery
A3MV2 - 48 V
Using the charger
To charge your battery, plug in the charger in a well ventilated area which is free from
inflammable products and other sources of combustible materials. The area must be at a
temperature between 10°C and 25°C and be sheltered from damp conditions.
1. Connect one end of the power cord to the
2. Connect the other end of the power cord
charger.
to the mains outlet.
3. When powered on, the charger initialises:
4. When the LEDs turn off, the charger is ready
Green LED + Red LED light for 2 seconds.
for use.
13

Advertisement

Table of Contents
loading

Table of Contents