infaco A3MV2-48V Original User Manual page 16

Storing the battery / Putting the battery to Sleep Mode or
Winter Mode
To keep your batteries in good condition
not used for more than 1 month) the following process must be applied (this process
can take up to 10 hours per battery):
The battery must be removed from the charger and stored in the case.
Wintering mode is disabled when the mains plug is disconnected from the chargers.
16
V.1
(at the end of every pruning season or when
1. Place the battery (or batteries) on the charge:
NOTE: If there are two batteries on the charger,
the sleep mode will be carried out on both
batteries, one after the other.
2. Press the SLEEP button to begin the process.
The LED switches to red (not flashing) and the
charging LED flashes green.
NOTE: If there are two batteries on the charger,
the sleep mode will be carried out on both
batteries, one after the other.
3. SLEEP MODE complete:
The charger's LED stays red (not flashing).
Channel1's LED (and channel 2's if there are 2
batteries) stays green (not flashing).