infaco A3MV2-48V Original User Manual page 15

Charging a second battery
A second battery can be placed on the charger:
Channel 1: Green LED flashes quickly throughout the charge.
Channel 2: Green LED flashes slowly throughout the wait.
Channel 1: Green LED on and not flashing (battery charged).
Channel 2: Green LED flashes quickly throughout the charge.
Channel 1: Green LED on (stops flashing).
Channel 2: Green LED on (stops flashing).
C.2
C.1
C.2
C.1
C.1
C.1
1. Place the battery on channel 2 of
the charger.
2. If the battery on channel 1 is char-
ging, the battery on channel 2 swit-
ches to a waiting charge status:
3. Once the battery on channel 1 is
fully charged, the battery on channel
2 begins charging:
4. The two batteries are charged:
15