Changing The Battery - HP Vectra VE5 4 User Manual

Hp vectra ve5 4: users guide
Hide thumbs Also See for Vectra VE5 4:
Table of Contents

Advertisement

WARNING
3 Troubleshooting Your PC

Changing the Battery

Changing the Battery
There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same or equivalent type
recommended by the manufacturer. The battery in this PC is a lithium
battery which does not contain heavy metals, nevertheless, in order to
protect the environment, do not dispose of batteries in household
waste. Please return used batteries to the shop from which you bought
them, or to the dealer from whom you purchased your PC, or to HP, so
that they can either be recycled or disposed of in an environmentally
sound way. Returned used batteries will be accepted free of charge.
The battery is not covered by the HP Warranty. You should order
replacement battery HP 1420-0356 from your local Sales and Service
office, or a "CR2032 type" battery, which is available from most local
stores.
After removing the computer's cover:
1 Remove the old battery by sliding it from under the retaining clip
(note the position of the cross).
2 Place the new battery in the battery holder, with the cross in the
same position as the old battery, and ensure that it is properly
seated. Ensure that the clip is in place and holds the battery firmly.
62
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra ve 4/xxx series

Table of Contents