Installing Memory; Installing Main Memory - HP Vectra VE5 4 User Manual

CAUTION
NOTE

Installing Memory

Static electricity can damage electronic components.
Turn all equipment OFF. Don't let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top of the PC
while you are removing the accessory from the bag. Handle the
accessory as little as possible and with care.

Installing Main Memory

Your PC is supplied with main memory. If you need more main memory
to run your application software, you can install up to a total of
192 MB (3 x 64 MB).
Main memory is available in modules of 16MB, 32MB, or 64MB. There
are three memory "banks", with each bank requiring one memory
module.
1
Bank
A Comes preloaded with either 16 MB or 32 MB SDRAM module
B Any 16 MB, 32 MB, or 64 MB SDRAM module
C Any 16 MB, 32 MB, or 64 MB SDRAM module
1. The letters "A", "B", and "C" are used for reference only in this manual. These letters do not
appear on the system board. The bank identified here as "C" is the one closest to the
processor.
Best performance is achieved if you install memory in bank "A" first,
then bank "B", and in bank "C" last.
2 How to Install Accessories In Your PC
Memory Modules You can Install
Installing Memory
English 23