Installing The New Processor - HP Vectra VE5 4 User Manual

NOTE
2 How to Install Accessories In Your PC
Installing an OverDrive Processor

Installing the New Processor

1 Locate the corner markers:
a on the processor—a dot or notch ("broken corner")
b on the processor socket—a dot.
2 Position the processor over the socket, with it's corner marker facing
the corner marker on the socket.
3 Place the processor into the socket.
4 Lower the lever to lock the processor into place.
5 Replace the heatsink and fasten the clip, if the heatsink is not
directly attached to the processor.
Do not change the system board switches after you install a new
processor.
6 Replace the computer's power supply and cover. Reconnect all
cables and power cords.
26 English