Changing The Battery - HP Vectra VLi8 Supplementary Manual

Hp vectra vli8: supplementary guide

Hide thumbs Also See for Vectra VLi8:

Table of Contents

WARNING

2 How to Install and Replace Components In Your Desktop PC

Changing the Battery

There is a danger of explosion if the battery is incorrectly installed. For

your safety, never attempt to recharge, disassemble, or burn the old

battery. Replace the battery only with the same or equivalent type

recommended by the manufacturer. The battery in this PC is a lithium

battery which does not contain heavy metals, nevertheless, in order to

protect the environment, do not dispose of batteries in household

waste. Please return used batteries to the shop from which you bought

them, or to the dealer from which you purchased your PC, or to HP, so

that they can either be recycled or disposed of in an environmentally

sound way. Returned used batteries will be accepted free of charge.

You should order replacement battery HP 1420-0356 from your local

Sales and Service office, or a "CR2032 type" battery, which is available

from most local stores.

After removing the computer's cover:

1 Remove the old battery by pressing the retaining clip with a

screwdriver and lifting the battery clear of the battery holder.

2 Place the new battery in the battery holder, with the "

and ensure it is properly seated.

After installing a replacement battery, replace the computer's cover

and run the Setup program to reconfigure the computer. You enter

Setup by pressing

at startup.

" sign on top,

Table of Contents